How to add BrandMeister talk group 31266 (Michigan Nets channel) to your DMR radio’s code plug

Posted on June 26, 2024

Just a reminder that the DMR Tech Net is moving from BrandMeister talk group 3126, the statewide Michigan channel to BrandMeister talk group 31266, the Michigan Nets channel starting this coming Monday, July 1st.

Several people have contacted us about how to add BM talk group 31266 to their radio.

You can also add the BrandMeister Michigan TAC 31264 channel using the same procedures but substitute 31264 in place of 31266 in the instructions and change the name.

Many different DMR radios use the same procedures since the radio is made by the same or similar manufacturers.

You will find the directions on how to do so using the radios listed below.

If your radio isn’t listed below, Dana KCØMYP, said he would research it and get back to you.

If so, let him know via email (dana@dmrtechnet.net) with your radio make and model number.

We hope you’ll have your DMR radios programmed with BrandMeister’s Michigan Nets channel so you can join us for the DMR Tech Net!

Your DMR Tech Net team.

  • Anytone 878, Anytone 578

  • TYT MD-380, TYT UV390, TYT MD-9600
  • Radioddity GD73A, Radioddity GD77, Radioddity GD88, Radioddity DB25-D
  • Alinco DJ-MD5T, Alinco DR-MD520T
  • Retevis RT82, Retevis RT90
  • Yaesu FT-70D
  • Cotre CO-04D, Cotre CO-06D
  • Baofeng DM-1701
  • BTech DMR-6X2
  • QYT KT-8900D

Steps to Add Talk Group 31266 (Michigan Nets) to AnyTone AT-D878UV

  1. Install and Open AnyTone CPS Software
  • Download and Install CPS: If you haven’t already, download the CPS software specific to the AnyTone AT-D878UV from the AnyTone website.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the appropriate programming cable to connect your AnyTone 878 to your computer.
  • Read from Radio: In CPS, go to Program > Read from Radio. This will download the current settings from your radio into the CPS.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar, find and click on the Digital Contacts section.
  • Add a New Contact: Click the Add button to create a new contact.
    • Contact Name: Enter a name like “Michigan Nets”.
    • Call Type: Set this to Group Call.
    • Contact ID: Enter 31266 for the Michigan Nets talk group.
  • Save: Click OK to save this contact.

  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel to open the channel list.
  • Add a New Channel: Click the Add button to create a new channel entry.
    • Channel Name: Name the channel something identifiable, such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the frequencies provided by your repeater or BrandMeister for your area.
    • Channel Type: Set to Digital.
    • Transmit Power: Choose an appropriate power level (Low, Medium, High, or Turbo).
    • Color Code: Set to the color code used by your repeater or network.
    • Time Slot: Select the appropriate time slot (usually TS1 or TS2, depending on the repeater’s configuration).
    • Contact Name: Choose “Michigan Nets” (the talk group contact you added earlier) from the drop-down list.
    • Group List: You can select a group list if you use them, or leave it empty.
    • Repeater Slot: Set this to match the time slot, usually TS1 or TS2.
  • Save: Click OK to save the new channel settings.
  1. (Optional) Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, find and click on the Zone section.
  • Select a Zone: Choose the zone where you want to add the new channel. A zone is a grouping of channels for easier access.
  • Add Channel to Zone: In the zone configuration, find and add the new channel “Michigan Nets TG31266” to the list of channels for that zone.
  • Save: Click OK to save the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Connect Your Radio: Ensure your radio is still connected to your computer.
  • Write to Radio: In CPS, go to Program > Write to Radio and choose All Data or Digital Contact/Channel if prompted.
  • Confirmation: The software will transfer the updated code plug to your radio. Wait until the process completes.
  1. Test the New Channel
  • Disconnect the Radio: Once the write process is complete, safely disconnect your radio from the computer.
  • Select and Test: Turn on your radio and navigate to the zone and channel you added for the Michigan Nets talk group. Ensure you can transmit and receive on the new channel.

Visual Reference and Tips

  • Frequency Information: Ensure you have the correct frequencies for your repeater or BrandMeister hotspot.
  • Backup: Always back up your existing code plug before making changes. You can do this by saving the code plug to your computer before making any modifications.
  • Documentation: Refer to the AnyTone AT-D878UV user manual for detailed information on CPS options and settings.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your AnyTone AT-D878UV radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to TYT MD-380

  1. Install and Open TYT MD-380 CPS Software
  • Download and Install CPS: Ensure you have the TYT MD-380 CPS software installed. This can often be found on the TYT website or through DMR community sites.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your TYT MD-380 to your computer.
  • Read from Radio: In CPS, go to Program > Read from Radio. This action downloads the current code plug from your radio to the software, allowing you to edit it.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS, find and click on Digital Contacts in the left sidebar.
  • Add a New Contact:
    • Click the Add button.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK to save the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information or Channels to view the existing channels.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name like “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies provided by your repeater or the BrandMeister network for your hotspot.
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network.
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Select “Michigan Nets” from the drop-down list of contacts.
    • Group List: If you use group lists, select or add one, though it’s optional.
    • Repeater Slot: This usually matches the time slot, TS1 or TS2.
  • Save: Click OK to save the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, find and click on Zone Information or Zones.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and name the zone (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone.
  • Save: Click OK to save the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data or specifically the updated Digital Contact/Channel information.
    • Confirm and let the CPS software transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your TYT MD-380 from the computer once the write process is complete.
  • Select and Test: Navigate to the zone and channel on your radio to confirm that you can transmit and receive on the new Michigan Nets talk group channel.

Additional Tips

  • Frequency Information: Make sure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is critical for proper communication.
  • Backup: Always backup your current code plug before making any changes. You can do this by saving the code plug file on your computer before you start editing.
  • Documentation: Consult the TYT MD-380 manual or user guides for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your TYT MD-380 radio’s code plug

Steps to Add Talk Group 31266 (Michigan Nets) to Radioddity GD73A

  1. Install and Open Radioddity GD73A CPS Software
  • Download and Install CPS: Ensure you have the Radioddity GD73A CPS software. This can be downloaded from the Radioddity website or comes on a CD with the radio.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Radioddity GD73A to your computer.
  • Read from Radio: In CPS, go to Program > Read from Radio. This action imports the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar of the CPS, select Contacts.
  • Add a New Contact:
    • Click Add to create a new contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Set this to Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name like “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose an appropriate power level (Low or High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or the talk group.
    • Contact: Choose “Michigan Nets” from the drop-down list.
    • Group List: If applicable, you can select or create a group list, though this is optional.
    • Repeater Slot: Match this to the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, find and click on Zone.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone.
  • Save: Click OK or Save to save the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Radioddity GD73A from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Make sure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Radioddity GD73A user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Radioddity GD73A radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Radioddity GD77

  1. Install and Open Radioddity GD77 CPS Software
  • Download and Install CPS: Ensure you have the Radioddity GD77 CPS software. You can download it from the Radioddity website.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Radioddity GD77 to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio. This will import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar of the CPS, select Digital Contacts.
  • Add a New Contact:
    • Click the Add button.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High, or Turbo) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact: Choose “Michigan Nets” from the drop-down list of contacts.
    • Group List: You can select or create a group list, though it’s optional.
    • Repeater Slot: This usually matches the time slot, TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, select Zone Information.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Radioddity GD77 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is essential for proper communication.
  • Backup: Always back up your existing code plug before making any changes. You can save the current code plug file to your computer before starting the editing process.
  • Documentation: Refer to the Radioddity GD77 user manual or online support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Radioddity GD77 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Radioddity GD88

  1. Install and Open Radioddity GD88 CPS Software
  • Download and Install CPS: Ensure you have the Radioddity GD88 CPS software. This can be downloaded from the Radioddity website.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Radioddity GD88 to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio. This action will import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, find and click on Digital Contacts in the left sidebar.
  • Add a New Contact:
    • Click the Add button.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Set this to Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name like “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. Example frequencies might be:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High, or Turbo) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Select “Michigan Nets” from the drop-down list of contacts.
    • Group List: Optionally, you can select or create a group list.
    • Repeater Slot: Match this to the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, find and click on Zone Information.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Radioddity GD88 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Make sure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Radioddity GD88 user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Radioddity GD88 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to TYT MD-380

  1. Install and Open TYT MD-380 CPS Software
  • Download and Install CPS: Ensure you have the TYT MD-380 CPS software installed on your computer. You can usually find this on the TYT website or other trusted radio forums.
  • Open CPS: Launch the CPS software after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your TYT MD-380 to your computer.
  • Read from Radio: In the CPS software, go to Program > Read Data from Radio. This action will import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, go to the Digital Contacts section usually found in the left sidebar.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Set this to Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, find and select Channel Information or Channel.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. Example frequencies might be:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Group List: Optionally, you can select or create a group list.
    • Repeater Slot: Match this to the time slot, TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, find and click on Zone Information or Zone.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write Data to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your TYT MD-380 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the TYT MD-380 user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your TYT MD-380 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Radioddity DB25D

  1. Install and Open Radioddity DB25D CPS Software
  • Download and Install CPS: Ensure you have the Radioddity DB25D CPS software. You can download it from the Radioddity website.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Radioddity DB25D to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio. This will import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar of the CPS, select Digital Contacts.
  • Add a New Contact:
    • Click the Add button.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact: Choose “Michigan Nets” from the drop-down list of contacts.
    • Group List: You can select or create a group list, though it’s optional.
    • Repeater Slot: This usually matches the time slot, TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, select Zone Information.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Radioddity DB25D from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is essential for proper communication.
  • Backup: Always back up your existing code plug before making any changes. You can save the current code plug file to your computer before starting the editing process.
  • Documentation: Refer to the Radioddity DB25D user manual or online support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Radioddity DB25D radio’s code plug

Steps to Add Talk Group 31266 (Michigan Nets) to AnyTone 578

  1. Install and Open AnyTone 578 CPS Software
  • Download and Install CPS: Ensure you have the AnyTone 578 CPS software. This can be downloaded from the AnyTone website or the BridgeCom Systems page.
  • Open CPS: Launch the CPS software on your computer.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your AnyTone 578 to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar of the CPS, select Digital Contacts.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information or simply Channels.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name like “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High, or Turbo) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of contacts.
    • Group List: You can select or create a group list, though it’s optional.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, select Zone Information.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your AnyTone 578 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Make sure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the AnyTone 578 user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your AnyTone 578 radio’s code plug

Steps to Add Talk Group 31266 (Michigan Nets) to Cotre CO-04D

  1. Install and Open Cotre CO-04D CPS Software
  • Download and Install CPS: Ensure you have the Cotre CO-04D CPS software installed on your computer. This can typically be found on the Cotre website or through your radio dealer.
  • Open CPS: Launch the CPS software after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Cotre CO-04D to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the left sidebar of the CPS, select Digital Contacts.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the left sidebar, select Channel Information or simply Channels.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name like “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of contacts.
    • Group List: Optionally, you can select or create a group list.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the left sidebar, select Zone Information.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Cotre CO-04D from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is essential for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Cotre CO-04D user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Cotre CO-04D radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Cotre CO-06D

  1. Install and Open Cotre CO-06D CPS Software
  • Download and Install CPS: Ensure you have the Cotre CO-06D CPS software installed on your computer. You can typically obtain this software from the Cotre website or from your radio dealer.
  • Open CPS: Launch the CPS software after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Cotre CO-06D radio to your computer.
  • Read from Radio: In the CPS software, go to Program > Read from Radio to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, find and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channel Information or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Mode: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Group List: Optionally, you can select or create a group list.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zone Information or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In CPS, go to Program > Write to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Cotre CO-06D from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Cotre CO-06D user manual or support resources for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Cotre CO-06D radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Yaesu FT-70D

  1. Install and Open Yaesu FT-70D CPS Software
  • Download and Install CPS: Obtain the Yaesu FT-70D CPS software from the official Yaesu website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Yaesu FT-70D radio to your computer.
  • Read from Radio: In the CPS software, navigate to Program > Read Data from Radio to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write Data to Radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to transfer the updated code plug to your radio.
  • Complete: Wait for the process to complete and ensure it is successful.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Yaesu FT-70D from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is essential for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Yaesu FT-70D user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Yaesu FT-70D radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to TYT UV390

  1. Install and Open TYT CPS Software
  • Download and Install CPS: Obtain the TYT CPS software compatible with the TYT UV390 from the official TYT website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your TYT UV390 radio to your computer.
  • Read from Radio: In the CPS software, navigate to Program > Read to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write to transfer the updated code plug to your TYT UV390 radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your TYT UV390 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the TYT UV390 user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your TYT UV390 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to TYT MD-9600

  1. Install and Open TYT CPS Software
  • Download and Install CPS: Obtain the TYT CPS software compatible with the TYT MD-9600 from the official TYT website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your TYT MD-9600 radio to your computer.
  • Read from Radio: In the CPS software, navigate to Program > Read to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write to transfer the updated code plug to your TYT MD-9600 radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your TYT MD-9600 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the TYT MD-9600 user manual or support forums for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your TYT MD-9600 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Alinco DR-MD520T

  1. Install and Open Alinco CPS Software
  • Download and Install CPS: Obtain the Alinco CPS software compatible with the DR-MD520T from the official Alinco website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Alinco DR-MD520T radio to your computer.
  • Read from Radio: In the CPS software, navigate to the option to read data from the radio (specific menu option may vary).
    • This step imports the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the section or menu option for digital contacts.
  • Add a New Contact:
    • Click Add or the equivalent to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, find and select the section for channels or channel information.
  • Add a New Channel:
    • Click Add or the equivalent to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select the section for zones or zone configuration.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button or equivalent.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, find and select the option to write or upload data to the radio.
    • Choose to write All Data or similar to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Alinco DR-MD520T from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Alinco DR-MD520T user manual or support resources for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Alinco DR-MD520T radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Retevis RT90

  1. Install and Open RT90 CPS Software
  • Download and Install CPS: Obtain the Retevis RT90 CPS software from the official Retevis website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Retevis RT90 radio to your computer.
  • Read from Radio: In the CPS software, navigate to Program > Read to import the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write to transfer the updated code plug to your Retevis RT90 radio.
    • Choose to write All Data to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Retevis RT90 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Retevis RT90 user manual or support resources for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Retevis RT90 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to Baofeng DM-1701

  1. Install and Open Baofeng DM-1701 Programming Software
  • Download and Install Software: Obtain the programming software (often referred to as CPS – Customer Programming Software) compatible with the Baofeng DM-1701 from the Baofeng website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your Baofeng DM-1701 radio to your computer.
  • Read from Radio: In the CPS software, navigate to the option to read data from the radio. This action imports the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add or the equivalent button to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button or equivalent.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write to transfer the updated code plug to your Baofeng DM-1701 radio.
    • Choose to write All Data or similar to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your Baofeng DM-1701 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the Baofeng DM-1701 user manual or support resources for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your Baofeng DM-1701 radio’s code plug.

Steps to Add Talk Group 31266 (Michigan Nets) to BTech DMR-6X2

  1. Install and Open BTech DMR-6X2 Programming Software
  • Download and Install Software: Obtain the programming software (often referred to as CPS – Customer Programming Software) compatible with the BTech DMR-6X2 from the BTech website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Code Plug from Your Radio
  • Connect Radio: Use the programming cable to connect your BTech DMR-6X2 radio to your computer.
  • Read from Radio: In the CPS software, navigate to the option to read data from the radio. This action imports the current settings from your radio into the CPS for editing.
  1. Add Talk Group 31266 to Digital Contacts
  • Navigate to Digital Contacts: In the CPS software, locate and select the Digital Contacts section.
  • Add a New Contact:
    • Click Add or the equivalent button to create a new digital contact.
    • Contact Name: Enter “Michigan Nets”.
    • Call Type: Select Group Call.
    • Contact ID: Enter 31266 (the talk group ID for Michigan Nets).
  • Save: Click OK or Save to store the new contact.
  1. Create a New Channel for Talk Group 31266
  • Navigate to Channels: In the CPS software, locate and select Channels or similar.
  • Add a New Channel:
    • Click the Add button to create a new channel.
    • Channel Name: Enter a name such as “Michigan Nets TG31266”.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the appropriate frequencies for your repeater or BrandMeister hotspot. For example:
      • RX Frequency: 439.9750 MHz
      • TX Frequency: 430.9750 MHz
    • Channel Type: Set this to Digital.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
    • Color Code (CC): Set this to the color code used by your repeater or network (usually between 1-15, commonly 1).
    • Time Slot (TS): Select the appropriate time slot (TS1 or TS2) used by your repeater or for the talk group.
    • Contact Name: Choose “Michigan Nets” from the drop-down list of digital contacts.
    • Repeater Slot: Typically matches the time slot, usually TS1 or TS2.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Zone
  • Navigate to Zones: In the CPS software, locate and select Zones or similar.
  • Select or Create a Zone:
    • If you already have a zone where you want to add this channel, select it.
    • To create a new zone, click Add and give the zone a name (e.g., “Michigan Nets”).
  • Add Channel to Zone: In the zone configuration window:
    • Select the new channel “Michigan Nets TG31266” from the list of available channels.
    • Add it to the list of channels in the selected zone by clicking the Add>> button or equivalent.
  • Save: Click OK or Save to store the zone configuration.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, navigate to Program > Write to transfer the updated code plug to your BTech DMR-6X2 radio.
    • Choose to write All Data or similar to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your BTech DMR-6X2 from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the zone, and select the channel “Michigan Nets TG31266”. Test to ensure you can transmit and receive on the new channel.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeater or BrandMeister hotspot. This information is crucial for proper communication.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the BTech DMR-6X2 user manual or support resources for detailed settings and additional features.

By following these steps, you can successfully add the BrandMeister talk group 31266 (Michigan Nets) to your BTech DMR-6X2 radio’s code plug.

Steps to Add Analog Channels on QYT KT-8900D (Analog)

  1. Install and Open QYT KT-8900D Programming Software
  • Download and Install Software: Obtain the programming software (CPS – Customer Programming Software) for the QYT KT-8900D from the QYT website or your radio dealer.
  • Open CPS: Launch the CPS software on your computer after installation.
  1. Read the Current Configuration from Your Radio
  • Connect Radio: Use the programming cable to connect your QYT KT-8900D radio to your computer.
  • Read from Radio: In the CPS software, find the option to read data from the radio. This imports the current settings from your radio into the CPS for editing.
  1. Add a New Analog Channel
  • Navigate to Channels: In the CPS software, locate and select the section for channels or channel information.
  • Add a New Channel:
    • Click Add or the equivalent to create a new channel.
    • Channel Name: Enter a name for your channel, such as “Michigan Nets” if it’s an analog channel.
    • Receive (RX) and Transmit (TX) Frequencies: Enter the frequency you wish to use for both receiving and transmitting.
    • Offset: Set the repeater offset if required for your local repeater setup (usually 0.600 MHz for 2m band and 5.000 MHz for 70cm band).
    • CTCSS/DCS: Set the CTCSS or DCS tones if needed for access to repeaters.
    • Transmit Power: Choose a power level (Low, Medium, High) based on your needs.
  • Save: Click OK or Save to store the new channel settings.
  1. Add the New Channel to a Memory Bank (Optional)
  • Navigate to Memory Banks: In the CPS software, find and select the section for memory banks or groups of channels.
  • Create or Select a Bank: If necessary, create a new memory bank or select an existing one.
  • Add Channel to Bank: Add the newly created channel to the memory bank to organize your channels logically.
  1. Write the Updated Code Plug to the Radio
  • Write to Radio: In the CPS software, find the option to write or upload data to the radio.
    • Choose to write All Data or similar to ensure all settings and channels are updated.
    • Confirm and allow the CPS software to complete the write operation.
  1. Test the New Channel
  • Disconnect the Radio: Safely disconnect your QYT KT-8900D from the computer once the write process is complete.
  • Select and Test: Turn on your radio, navigate to the programmed channel (e.g., “Michigan Nets”), and test communication to ensure it works correctly on the selected frequency.

Additional Tips

  • Frequency Information: Ensure you have the correct frequencies for your local repeaters or simplex channels.
  • Backup: Always create a backup of your existing code plug before making changes. Save the code plug file on your computer before starting the editing process.
  • Documentation: Refer to the QYT KT-8900D user manual or support resources for detailed settings and additional features.

 

DMR Tech Net